Metal Shingle Roofing
Metal shingles are steel or aluminum panels shaped to look like asphalt shingles, slate or wood shake, so you get the long life of a metal roof with a look that fits a traditional neighborhood. We install metal shingle roofs across Dallas-Fort Worth from our Haslet headquarters and across the Birmingham area from our Irondale office, starting with a free inspection.
Metal Shingle Roofing
Metal shingles are steel or aluminum panels shaped to look like asphalt shingles, slate or wood shake, so you get the long life of a metal roof with a look that fits a traditional neighborhood. We install metal shingle roofs across Dallas-Fort Worth from our Haslet headquarters and across the Birmingham area from our Irondale office, starting with a free inspection.






request a free inspection
Fill out the form below and a member of our team will reach out to you as soon as possible. Or “Book Now” to schedule an appointment.
What Metal Shingles Are
Metal shingles are pressed from coated steel or aluminum into panels that each cover the space of several regular shingles. The panels lock into the ones around them, and a baked-on paint finish gives them their color. From the street they look like a shingle, slate or shake roof, but they’re metal underneath.
Because they’re metal, they last much longer than asphalt. Many metal shingle roofs are expected to last 30 to 50 years. They cost more than architectural shingles but usually less than a standing seam roof, which puts them in the middle for price.
The tradeoff to know about is slope. Metal shingles need a steeper roof than standing seam to shed water properly, so they’re a good fit for most sloped homes but not for nearly flat sections like porches. Light-colored and reflective finishes can also cut down on how much heat the roof soaks up in summer.
why this may be the right roofing for your home
- Traditional Shingle Look
- Lasts Decades Longer
- Light, Interlocking Panels
- Noncombustible Metal
- Sheds Rain and Debris
- Reflective Finish Options







Our clients say it best
I cannot say enough good things about our experience with SWAT. Andrew and Michelle were both so helpful and easy to work with. We had a mess with our insurance company and they worked with us to find a solution.
James Byrnes
Happy Client
I enjoy having James as my contractor. He was very concerned with making sure my work schedule was not interrupted. He responded with patience to all my questions ,concerns and going through paper work.
dorthea lawson
Happy Client
How We Install Metal Shingles
We remove the old roof down to the decking, replace any damaged boards and lay a synthetic underlayment over the whole roof. The metal shingles go on from the bottom up, each panel locking into the row below it, and on most systems the fasteners are covered by the next row so no screw heads are left exposed to the weather. The flashing, valleys and ridge are finished with trim made for the same system, because those are the spots where a metal roof either stays dry or doesn’t.
frequently asked questions
Both are metal and both last a long time. Metal shingles are made to look like traditional shingles, slate or shake, while standing seam has long vertical panels and a clean, modern look. Standing seam also works on lower-slope roofs and usually costs more.
Many are expected to last 30 to 50 years, which is often two of the asphalt roofs a house would otherwise need. The finish, the metal and how carefully the flashing is done all affect where your roof lands in that range.
Not when it’s installed over a solid wood deck and underlayment, which is how we install it on homes. The noise people remember usually comes from metal on open framing, like a barn or a carport.
Large hail can dent metal, especially aluminum. Steel holds up better, textured and stone-coated finishes hide small dents, and some metal shingle products carry a Class 4 impact rating. Dents that don’t cause leaks are often treated as cosmetic by insurance, so read your policy before you choose.
They cost more up front than architectural shingles and usually less than standing seam. Because they last so much longer, the cost per year of the roof is often close to or better than asphalt. Our inspector prices your exact roof in person, and you get a written price before any work is scheduled.
Metal shingles need more pitch than a nearly flat roof has. Each product has a minimum slope set by the manufacturer, and nearly flat sections need standing seam or a flat roof membrane instead. We check the slope of every section during the inspection.
Stop worrying and reach out today
We’ll explain each step as we go, and you’ll have a written scope and price before any work starts.







